Lift Support Coulmn

Products > Life Support Column, Medical Gas

Lift Support Coulmn

Designed for use in ICU, CCU and emergency rooms. Convenient to use and provides good patient care.
Can install medical gas system equipment with sockets, electrical equipment, telephone, TV, etc.
Can install medical equipment and adjust up and down as needed.
Can install EKG MONITOR, BLOOD PRESSURE, IV POLE panel set, various solution infusion machines, INFUSION PUMP, TRAY, CATHETER HOLDER, AMBU BAG HOLDER, GAS OUTLET, EE Socket and other equipment, etc.
The main structure is made of EXTRUDE ALUMINUM, strong and durable. The surface plate is made of special material TRESPA? Resistant to acids – alkalis, dust does not stick, Anti-Static, prevents the spread of bacteria on the surface plate.
There are 5 – 10 electrical outlets (DUPLEX), and there are spaces for NURSE CALL telephone lines and EKG signal lines. Medical gas outlets can be selected according to needs, such as Wall Outlet 2 Oxygen, 1 Air, 2 Vacuum, 2 Slide
Equipment and safety standards NFPA 99, CE KARK, ISO 9001 have general properties according to NFPA 99 standards.
Install gas system with sockets, electrical equipment, telephone, TV, etc.
Install IV POLE panel set, various solution dispensers, TRAY and other equipment such as MONITOR
The surface uses TRESPA material, which is acid-resistant and does not collect dust and bacteria.

PDF Download

Oxygen Therapy Unit (Nebulizer) Wall-mounted oxygen and humidifier unit with adjustable percentage spraying

FLOW METER can adjust oxygen flow rate 0-15 liters / minute
The body is made of anodized aluminum, light weight
There is a dust filter inside the flowmeter
Nebulizer can be adjusted to 3 levels 40%, 70% and 100%
There is a slot for a HEATER for heating
There is a check valve slot to release pressure When the pressure is more than 2 PSI or 40 mm / Hg
500 cc humidifier cylinder made of polysulfon (POLYSULPHON), durable, not broken, the cylinder can be sterilized by autoclaving

The secondary entrance door from the operating room to the hand washing room is designed for use in the operating room as a sliding door, brand MARKUS, model M5 or MARKRONOMIC, which is a European or American product. It has an opening size of 1,500 mm. x 2,100 mm. with a glass window size of 300 mm. x 300 mm. It is a hermetic sealing system. The top and sides of the door edge are installed with RUBBER SEALING PROFILE rubber sheets and the bottom edge of the door is installed with STRIP RIGID RUBBER SEAL rubber edges along the line with hanging rails to support the door. The sliding door runs on BALL RACES with NYLON wheels. There is a door handle made of aluminum. The door opens and closes automatically controlled by a MICRO PROCESSOR. MICRO PROCESSOR with elbow switch and NO TOUCH SWITCH. There is a SINGLE – BEAM PHOTO – ELECTRIC CELL safety system. If there is an obstacle at the door, the door will stop and open automatically in case of malfunction of the automatic open-close set or power outage. The door can be opened-closed with the door handle. The door is about 40 mm thick and can prevent noise of about 27 decibels. The door frame is made of SATIN ANODIZED EXTRUDED ALUMINIUM SATIN ANODIZED EXTRUDED ALUMINIUM. The door surface is covered with PLASTIC PLASTIC LAMINATE. The door frame and door are finished products from the same manufacturer. The main entrance door to the operating room has been tested according to the air leakage prevention standard AIR PERMEABILITY TEST SLIDING DOOR ANSI / UL 1784 or BS 476.

Note: The product is a MARKUS or KONE brand from the Netherlands.

Suction Unit Rail Mounted

Suction Unit for Patients, Hanging on Equipment Rail

Adjustable suction rate 0 – 760 mm/Hg or 0 – 200 mm/Hg
With overflow bottle (TRAP BOTTLE) to prevent liquid from overflowing into the system. The bottle is made of polysulfone, durable, not broken
The bottle holds 1,800 cc of liquid and sputum. The bottle is clear and can be seen all around. There are lines indicating the amount of liquid. Can be sterilized by steam. Convenient for cleaning. With hanging basket
With a holder on the equipment hanging rail to move back and forth to the desired position. Suitable for use in emergency rooms and critical patient rooms

Bubble Jet Bottle

Humidifier and mist bottle

Humidifier and spray bottle (Bubble Jet) size 500 cc.
Made of polysulfone (POLYSULPHON), durable, not broken when dropped. The atomizer can be removed for cleaning in case of clogging.
The bottle can be sterilized by autoclaving.
There is a check valve slot to release pressure when the pressure exceeds 2 PSI or 40 mm/Hg.

Area alarm system

Alarm system / AREA ALARM
Alerts of abnormal gas system conditions with light and sound
The system works with ELECTRONIC CIRCUIT BOARD
There is a pressure level gauge (Pressure & vacuum gauge)
Alarm system / AREA ALARM is a product that has been certified for production standards according to ISO 9001 and ISO 13485, CE MARK. It has general properties that meet NFPA 99 standards.

Oxygen Therapy Unit with Humidifier Rail Mounted

Oxygen and humidifier set hanging on equipment rail

Flowmeter, adjust oxygen flow rate 0 – 15 liters/minute
The housing is made of anodized aluminum, light weight
There is a dust filter inside the flowmeter
500 cc humidifier cylinder made of polysulfon (POLYSULPHON), durable, not broken, made free from germs by autoclaving
There is a check valve slot to release pressure when the pressure exceeds 2 PSI or 40 mm/Hg
There is a holder on the equipment hanger to move back and forth to the desired position

PDF Download

Featured Products

Oxygen Therapy Unit (Nebulizer) Wall-mounted oxygen and humidifier unit with adjustable percentage spraying

Secondary entrance door from the operating room to the washing room

Suction Unit Rail Mounted

Bubble Jet Bottle

Area alarm system

Oxygen Therapy Unit with Humidifier Rail Mounted

Contact Us

J.E.P. enterprise,co.ltd

Useful Links

Follow Us

© Copyright J.E.P. enterprise,co.ltd 2024.