Products > Medical Gas, Zone Value
Zone Valve Box Gas Shut-Off Valve System

Zone Valve Box Gas Shut-Off Valve System

zone-valve-box-001
  • The valve body can withstand pressure up to 500 PSIG.
  • Valve body is a full bore port, 3-piece valve.
  • Standard pressure gauge for inspection and service.
  • It has properties according to NFPA 99.

PDF Download

Featured Products

See All
Vacuum-Breaker-Unit-Wall-Mounted-001

Vacuum Breaker Unit Wall Mounted

Wall-mounted chest suction unit

  • Adjustable suction rate from 0 – 30 cm/H2O
  • There is a water bottle to measure the suction rate from 0 – 30 cm/H2O
  • The bottle holds liquids and sputum of 1,800 cc. The bottle is clear and can be seen all around. There are lines indicating the amount of liquid. It can be sterilized by steam. Convenient for cleaning, with a hanging basket.
Humidifier-Bottle-001

Humidifier Bottle

  • 500 cc humidifier cylinder made of POLYSULPHON, durable, not broken if dropped
  • The cylinder can be sterilized by autoclaving
  • There is a check valve to release pressure when the pressure exceeds 2 PSI or 40 mm/Hg
Anaesthetics-Gas-001

Anaesthetics Gas Scavenging Service Inlet (Venturi type)

The Silbermann jet scavenging inlet is designed for safe removal of surplus anaesthetic gas from the operating theatre.

The scavenging inlet assembly uses compressed air to create suction and propels the contaminated air to the outside atmosphere.

Features

  • Operation based on compressed air – No need for a central AGSS system
  • When probe is connected, green pneumatic indicator showing system is in use
  • Very quiet operation
  • Automatic shut off when probe is disconnected
  • Flow and vacuum adjustment
  • Locking mechanism quick connect

Medical Gas System Standards:

  • NFPA99
  • ISO 7396
  • G-01
  • HTM 02-01

Silbermann’s Quality Management System:

  • EN ISO 13485-2016
  • ISO 9001-2015
  • CE marked
Mazor-au-001

New Mazor-AU (Touch Screen) Fully Automatic Medical Gas Manifold

The New Mazor-AU fully automatic changeover system is designed to meet the NFPA99, or EN ISO 7396-1, or HTM02-01 or G-01 standard.

The system manages 2 sources and provides continuous supply and smooth automatic bank switchover by means of pneumatic shuttle valve.

All medical gas information is displayed graphically and digitally on a 12” full HD LCD touch screen

Features & Benefits

  • Continuous supply and smooth automatic bank switchover, without pressure fluctuation, by means of pneumatic shuttle valve.
  • Maintenance friendly- designed to enable maintenance during operation without the need to distrupt the gas supply.
  • LCD 12” touch screen display.
  • Graphically & digitally display of the actual status of each source- “In use” or “Stand by”.
  • Visual & audio alarm signals in case of change between banks, “Below min” and High/Low line supply pressure.
  • Leak detection from manifolds on Stand-By mode.
  • Secured Ethernet based network communication between all units.
  • Unique secured authentication of each unit to avoid fake/masking of alarms.
  • Flow & Consumption – Monitors & displays flow rate and consumption of the medical gas*.
  • A color trend arc showing the gas pressure status on the main line and at each bank
  • Optional- display of heaters during idle and active states.
  • Automatic adjustment of screen brightness (day & night mode).
  • Event logging, recording all alarms and panel activities.
  • Periodical maintenance alert.
  • Customizable text & language.
  • Alarm test & mute buzzer buttons.
  • Advanced Communication:
    • Ethernet Modbus
    • Remote monitoring through building management system available.
    • Option for remote viewing through mobile device or remote computer.

Silbermann’s Quality Management System:

  • EN ISO 13485-2016
  • ISO 9001-2015

 

Rail-Clamp-And-Universal-Clamp-001

Rail Clamp And Universal Clamp

A device hanging rail clamp

  • Equipment holder with medical equipment hanging rail for emergency rooms and intensive care rooms. The attached equipment can be moved horizontally.
Recessed-Diamond-type-001

Recessed (Wall) Service Outlet Quick-Connect Sil-Ohio Diamond Type

We design and manufacture our Terminal Units to last and to ensure a
constant and reliable medical gas flow for the patient and the medical
equipment.

All outlets are 100% tested for flow, and leakage.
They are cleaned for oxygen services before shipping.
Our outlets are designed by industrial designers to ensure an appealing
and pleasant environment for the patient and the medical staff.

Features

  • Accepts Sil-Ohio (Diamond type) gas specific outlets.
  • All outlets are 100% hydrostatic tested for leaks. The outlets are factory assembled, degreased and cleaned for medical gas service.
  • Indexed to eliminate interchangeability of gas services.
  • 360 swivel inlet pipe for ease of installation.
  • Low maintenance due to use of VITON seals in front assembly (latch valve).
  • Modular singles – designed to provide ganging of rough-in modules in the field to form multiples at any order with 120mm spacing.

Medical Gas System Standards:

  • NFPA99, EN ISO 7396-1 requirements.

Applicable Standards:

  • NFPA99
  • ISO 9170-1.

Silbermann’s Quality Management System:

  • CE marked by the notified body TÜV-SÜD.

Contact Us

J.E.P. enterprise,co.ltd

  • 235/8 21 สุขุมวิท 21 (อโศก) แขวงคลองเตยเหนือ เขตวัฒนา กรุงเทพมหานคร 10110
  • 02 258 0447
  • info@jep.co.th

Useful Links

Follow Us

Facebook Line

© Copyright J.E.P. enterprise,co.ltd 2024.