Oxygen Therapy Unit (Nebulizer) Wall-mounted oxygen and humidifier unit with adjustable percentage spraying

Products > Medical Gas, Oxygen & Suction Unit

FLOW METER can adjust oxygen flow rate 0-15 liters / minute
The body is made of anodized aluminum, light weight
There is a dust filter inside the flowmeter
Nebulizer can be adjusted to 3 levels 40%, 70% and 100%
There is a slot for a HEATER for heating
There is a check valve slot to release pressure When the pressure is more than 2 PSI or 40 mm / Hg
500 cc humidifier cylinder made of polysulfon (POLYSULPHON), durable, not broken, the cylinder can be sterilized by autoclaving

Area alarm system

Alarm system / AREA ALARM
Alerts of abnormal gas system conditions with light and sound
The system works with ELECTRONIC CIRCUIT BOARD
There is a pressure level gauge (Pressure & vacuum gauge)
Alarm system / AREA ALARM is a product that has been certified for production standards according to ISO 9001 and ISO 13485, CE MARK. It has general properties that meet NFPA 99 standards.

The equipment of the tool rack and equipment installation is a ceiling type (CEILING PENDANT) with 2 arms, each side is installed on a separate pivot shaft in the ceiling. Both arms can be conveniently moved to be used on either the left or right side of the patient’s bed.
The end of each arm is the shelf installation place that can rotate 340 degrees. It can be adjusted to rotate left and right smoothly with special ball bearings and adjusted to stop firmly with Adjustable Friction Brake or Pneumatic Brake. The maximum operating radius is up to 2,200 mm.
Can support a total weight of up to 360 kilograms.
Equipment and safety standards NFPA 99C, CE KARK, ISO 9001. General properties according to NFPA 99.

Oxygen and humidifier set hanging on equipment rail

Flowmeter, adjust oxygen flow rate 0 – 15 liters/minute
The housing is made of anodized aluminum, light weight
There is a dust filter inside the flowmeter
500 cc humidifier cylinder made of polysulfon (POLYSULPHON), durable, not broken, made free from germs by autoclaving
There is a check valve slot to release pressure when the pressure exceeds 2 PSI or 40 mm/Hg
There is a holder on the equipment hanger to move back and forth to the desired position

DIGITAL MASTER ALARM SYSTEM

Waiting for the main alarm system
Indicates abnormal gas conditions with light and sound
Micro Processor Control system displays results with light and digital display (Digital Display)
Digital Alarm System / MASTER ALARM
Alerts abnormal gas system conditions with light and sound
Operating system with MICROPROCESSOR CONTROL Displays with light and sound
Alarm System / MASTER ALARM is a product certified for production standards according to ISO 9001 and ISO 13485, CE MARK. It has general features that meet NFPA 99 standards.