Recessed (Wall) Service Outlet Quick-Connect Sil-Ohio Diamond Type

Products > Medical Gas, Service Outlet

We design and manufacture our Terminal Units to last and to ensure a
constant and reliable medical gas flow for the patient and the medical
equipment.

All outlets are 100% tested for flow, and leakage.
They are cleaned for oxygen services before shipping.
Our outlets are designed by industrial designers to ensure an appealing
and pleasant environment for the patient and the medical staff.

Features

Accepts Sil-Ohio (Diamond type) gas specific outlets.
All outlets are 100% hydrostatic tested for leaks. The outlets are factory assembled, degreased and cleaned for medical gas service.
Indexed to eliminate interchangeability of gas services.
360 swivel inlet pipe for ease of installation.
Low maintenance due to use of VITON seals in front assembly (latch valve).
Modular singles – designed to provide ganging of rough-in modules in the field to form multiples at any order with 120mm spacing.

Medical Gas System Standards:

NFPA99, EN ISO 7396-1 requirements.

Applicable Standards:

NFPA99
ISO 9170-1.

Silbermann’s Quality Management System:

CE marked by the notified body TÜV-SÜD.

PDF Download

Oxygen Therapy Unit with Humidifier Rail Mounted

Oxygen and humidifier set hanging on equipment rail

Flowmeter, adjust oxygen flow rate 0 – 15 liters/minute
The housing is made of anodized aluminum, light weight
There is a dust filter inside the flowmeter
500 cc humidifier cylinder made of polysulfon (POLYSULPHON), durable, not broken, made free from germs by autoclaving
There is a check valve slot to release pressure when the pressure exceeds 2 PSI or 40 mm/Hg
There is a holder on the equipment hanger to move back and forth to the desired position

This colorful 12” touch screen main alarm panel monitors and displays the medical gas source equipment information as required by the latest additions of NFPA99, EN ISO 7396-1 and HTM02-01.

The new Silbermann touch screen main alarm panel incorporates state of the art Hi security technology, protecting the information displayed and transmitted, from malicious attacks.

Features

LCD 12” touch screen display.
Display of up to 62 alarms on screen.
Aesthetics & smooth design without buttons for infection control.
Secured Ethernet based network communication between all units.
Unique secured authentication of each unit to avoid fake/masking of alarms.
Automatic adjustment of screen brightness (day & night mode).
Self diagnostics with error display for problem identification.
Event logging, recording all alarms and panel activities.
Periodical maintenance alert.
Customizable text & language for alarms text.
Adjustable alert display- No vacant fields regardless to the No. of alerts.
Adjustable alert display- managing the alarm display for alerts that require high priority.
Adjustable digital alarms color (Red/ Yellow).
Enable/ Disable of digital alarm.
Adjustable digital alarm type (NO/ NC).
Automatic adjustment of screen brightness (day & night mode).
Remote monitoring dry contacts of gas pressure alarm condition including:
- High & Low alert,
- Below Min alert,
- Any Alarm.
Hinged panel opening for easy installation and maintenance.
Built-In relay for remote annunciator applications.
Advanced Communication:
- Remote viewing through mobile device or remote computer.
- Wifi communication available.
- Remote monitoring (Via TCP/IP ModBus) through building management system available.
- Remote monitoring dry contacts of High and Low gas pressure alarm condition.

Applicable Standards

Medical Gas Systems: NFPA99,
EN ISO 7396-1 & HTM02-01 requirements.

Oxygen Therapy Unit (Nebulizer) Wall-mounted oxygen and humidifier unit with adjustable percentage spraying

FLOW METER can adjust oxygen flow rate 0-15 liters / minute
The body is made of anodized aluminum, light weight
There is a dust filter inside the flowmeter
Nebulizer can be adjusted to 3 levels 40%, 70% and 100%
There is a slot for a HEATER for heating
There is a check valve slot to release pressure When the pressure is more than 2 PSI or 40 mm / Hg
500 cc humidifier cylinder made of polysulfon (POLYSULPHON), durable, not broken, the cylinder can be sterilized by autoclaving

Oxygen Flowmeter Wall Mounted

Oxygen flowmeter 0- 15 liters/minute, wall mounted

Flowmeter can adjust oxygen flow rate from 0 – 15 liters/minute
Made of anodized aluminum, light weight
There is a dust filter inside the flowmeter.

Operating room floor ANTISTATIC ANTIST

The operating room floor is HEAVY DUTY type rubber tile or scientific carpet in roll form with the properties of ANTISTATIC CONDUCTIVE VINYL FLOOR COVERING, brand ARMSTRONG or equivalent to EN 649 standards, approximately 2 meters wide and 2 millimeters thick. The tiles on the floor will be laid up to the walls, approximately 150 mm high. All seams will be seamlessly connected.

New Mazor-AU (Touch Screen) Fully Automatic Medical Gas Manifold

The New Mazor-AU fully automatic changeover system is designed to meet the NFPA99, or EN ISO 7396-1, or HTM02-01 or G-01 standard.

The system manages 2 sources and provides continuous supply and smooth automatic bank switchover by means of pneumatic shuttle valve.

All medical gas information is displayed graphically and digitally on a 12” full HD LCD touch screen

Features & Benefits

Continuous supply and smooth automatic bank switchover, without pressure fluctuation, by means of pneumatic shuttle valve.
Maintenance friendly- designed to enable maintenance during operation without the need to distrupt the gas supply.
LCD 12” touch screen display.
Graphically & digitally display of the actual status of each source- “In use” or “Stand by”.
Visual & audio alarm signals in case of change between banks, “Below min” and High/Low line supply pressure.
Leak detection from manifolds on Stand-By mode.
Secured Ethernet based network communication between all units.
Unique secured authentication of each unit to avoid fake/masking of alarms.
Flow & Consumption – Monitors & displays flow rate and consumption of the medical gas*.
A color trend arc showing the gas pressure status on the main line and at each bank
Optional- display of heaters during idle and active states.
Automatic adjustment of screen brightness (day & night mode).
Event logging, recording all alarms and panel activities.
Periodical maintenance alert.
Customizable text & language.
Alarm test & mute buzzer buttons.
Advanced Communication:
- Ethernet Modbus
- Remote monitoring through building management system available.
- Option for remote viewing through mobile device or remote computer.