Products > Alarm System, Medical Gas
Medical Gas Area Alarm Panel

Medical Gas Area Alarm Panel

Medical-Gas-Area-Alarm-Panel-001

An innovative 12” touch screen area alarm panel monitors and displays the local medical gas information as required by the latest additions of NFPA99, EN ISO 7396-1 and HTM02-01.

The new Silbermann touch screen alarm panel incorporates state of the art Hi security technology, protecting the information displayed and transmitted, from malicious attacks

Features

  • LCD 12” touch screen display.
  • Display of 1-10 gases alarms on screen.
  • Aesthetics & smooth design without buttons for infection control.
  • Secured Ethernet based network communication between all units.
  • Unique secured authentication of each unit to avoid fake/masking of alarms.
  • Remote viewing through remote computer.
  • Gas specific sensor with DISS nut and nipple to avoid mechanical cross connection.
  • For Future Use- disables a gas alarm untill the gas pipeline infrastructure is complete.
  • Multi linguistic- Available in English, Spanish, Russian, Arabic & Chinese.
  • Commissioning- Enables to identify gas leaks before commission.
  • A color trend arc showing the gas pressure status.
  • Automatic adjustment of screen brightness (day & night mode).
  • Self diagnostics with error display for problem identification.
  • Event logging, recording all alarms and panel activities.
  • Periodical maintenance alert.
  • Customizable text for panel location.
  • Highly accurate solid state pressure piezo-resistive transducer.
  • Hinged panel opening for easy installation and maintenance.
  • On-site adjustment of HI and LOW set-points for each Gas & gas units.
  • Built-In relay for remote annunciator applications.
  • Gas specific digital sensors mounted locally or remotely, up to 1500m, utilizing 12 gauge twisted pair.
  • Wifi communication available.
  • Remote monitoring (Via TCP/IP Modbus) through building management system available.

Applicable Standards

  • Medical Gas Systems: NFPA99,
  • EN ISO 7396-1 & HTM02-01 requirements.

PDF Download

Featured Products

See All
Anaesthetics-Gas-001

Anaesthetics Gas Scavenging Service Inlet (Venturi type)

The Silbermann jet scavenging inlet is designed for safe removal of surplus anaesthetic gas from the operating theatre.

The scavenging inlet assembly uses compressed air to create suction and propels the contaminated air to the outside atmosphere.

Features

  • Operation based on compressed air – No need for a central AGSS system
  • When probe is connected, green pneumatic indicator showing system is in use
  • Very quiet operation
  • Automatic shut off when probe is disconnected
  • Flow and vacuum adjustment
  • Locking mechanism quick connect

Medical Gas System Standards:

  • NFPA99
  • ISO 7396
  • G-01
  • HTM 02-01

Silbermann’s Quality Management System:

  • EN ISO 13485-2016
  • ISO 9001-2015
  • CE marked
Oxygen-Therapy-Unit-with-Humidifier-001

Oxygen Therapy Unit with Humidifier Rail Mounted

Oxygen and humidifier set hanging on equipment rail

  • Flowmeter, adjust oxygen flow rate 0 – 15 liters/minute
  • The housing is made of anodized aluminum, light weight
  • There is a dust filter inside the flowmeter
  • 500 cc humidifier cylinder made of polysulfon (POLYSULPHON), durable, not broken, made free from germs by autoclaving
  • There is a check valve slot to release pressure when the pressure exceeds 2 PSI or 40 mm/Hg
  • There is a holder on the equipment hanger to move back and forth to the desired position
Rigid-Ceiling-Columns-002

Rigid Ceiling Columns

  • Medical gas distribution center and electrical outlets hanging from the ceiling, RIGID CEILING COLUMN for operating rooms, installed according to the appropriate design for the use of the operating room
  • This distribution center set has a structure made of EXTRUDED ANODIZED ALUMINUM and the surrounding surface is made of synthetic materials, 6 mm thick flat sheet, with the properties of not being a place for dust and preventing static electricity (ANTI-STATIC)
  • Does not absorb moisture and does not accumulate germs
  • Available in both FIX and non-up and down types and electrically up and down types
  • The distribution center set is a product certified by ISO 9001 and, CE MARK, ISO 14385, with general properties according to NFPA 99.
quick-connect-001

Oxygen Therapy Unit (Nebulizer) Wall-mounted oxygen and humidifier unit with adjustable percentage spraying

  • FLOW METER can adjust oxygen flow rate 0-15 liters / minute
  • The body is made of anodized aluminum, light weight
  • There is a dust filter inside the flowmeter
  • Nebulizer can be adjusted to 3 levels 40%, 70% and 100%
  • There is a slot for a HEATER for heating
  • There is a check valve slot to release pressure When the pressure is more than 2 PSI  or  40 mm / Hg
  • 500 cc humidifier cylinder made of polysulfon (POLYSULPHON), durable, not broken, the cylinder can be sterilized by autoclaving
Vacuum-pump-system-001

Medical Vacuum Pump System

Rotary vane vacuum pumps with oil-lubricated

  • Rotary pump with Oil-injection system
  • Internal lubrication system
  • Low noise level during operation
  • Durable for heavy use
  • Easy maintenance
zone-valve-box-001

Zone Valve Box

Valve box with a pull-out window and Valve box with an aluminium door

General Speciications

  • Zone valve box shall be Silbermann series.
  • Each recessed/exposed zone valve shall consist of a steel valve box constructed of 1.5 mm steel sheet, complete with a backed enamel inish RAL 9016, which can house single or multiple shut-off ball valves with the tube extensions.
  • Valves shall be a 3-piece forged brass and a 4 bolt design, bronze or brass body, stem, ball bolts and nuts shall be made of stainless steel , double seal, full port union balltype, with Telon (RPTFE) seats and Viton seals, with a pressure rating of 4080 kPa (600 psi) or 40.8 bars.
  • Valves shall be operated by a lever-type handle requiring anly a quarter turn from a fully opened to a fully closed position. All valves shall be equipped with type “K” washed and degreased copper pipe stub extensions of suficient length to protrude beyond the sides of the box.
  • All pipe stub extensions shall be supplied with suitable plugs or caps to prevent contamination of the assembly prior to installation.
  • Each valve shall be supplied with a medical gas identiication label.
  • Valves shall be available with or without line pressure gauges, as required. Gauges, shall be 50 mm diameter.
  • Pressure gauges shall read 0-1100 kPa (0-11 bar) for all gauges except Nitrogen, which shall read 0-2500 kPa (0-25 bar), and Vacuum, which shall read 0-100 kPa (0-760 mmHg).
  • There are two front options: an aluminum door or a pull-out removable window.

Contact Us

J.E.P. enterprise,co.ltd

  • 235/8 21 สุขุมวิท 21 (อโศก) แขวงคลองตันเหนือ เขตวัฒนา กรุงเทพมหานคร 10110
  • 02 258 0447
  • info@jep.co.th

Useful Links

Follow Us

Facebook Line

© Copyright J.E.P. enterprise,co.ltd 2024.