Oxygen Portable Outlet

Products > Medical Gas, Oxygen & Suction Unit

Quick plug outlet for ceiling mounting

Silbermann , Ohio Type consists of Primary and Secondary check valves with threaded connections The hose is 1/4? NPT for use with surgical supply line sets

Lift Support Coulmn

Designed for use in ICU, CCU and emergency rooms. Convenient to use and provides good patient care.
Can install medical gas system equipment with sockets, electrical equipment, telephone, TV, etc.
Can install medical equipment and adjust up and down as needed.
Can install EKG MONITOR, BLOOD PRESSURE, IV POLE panel set, various solution infusion machines, INFUSION PUMP, TRAY, CATHETER HOLDER, AMBU BAG HOLDER, GAS OUTLET, EE Socket and other equipment, etc.
The main structure is made of EXTRUDE ALUMINUM, strong and durable. The surface plate is made of special material TRESPA? Resistant to acids – alkalis, dust does not stick, Anti-Static, prevents the spread of bacteria on the surface plate.
There are 5 – 10 electrical outlets (DUPLEX), and there are spaces for NURSE CALL telephone lines and EKG signal lines. Medical gas outlets can be selected according to needs, such as Wall Outlet 2 Oxygen, 1 Air, 2 Vacuum, 2 Slide
Equipment and safety standards NFPA 99, CE KARK, ISO 9001 have general properties according to NFPA 99 standards.
Install gas system with sockets, electrical equipment, telephone, TV, etc.
Install IV POLE panel set, various solution dispensers, TRAY and other equipment such as MONITOR
The surface uses TRESPA material, which is acid-resistant and does not collect dust and bacteria.

Oxygen and humidifier set with adjustable percentage hanging on equipment rail

Flowmeter can adjust oxygen flow rate 0 – 15 liters / minute
There is a dust filter set inside the flowmeter
The spray bottle can be adjusted to 3 levels: 40%, 70% and 100%
There is a slot for a HEATER for heating
There is a check valve slot to release pressure when the pressure exceeds 2 PSI or 40 mm / Hg
500 cc humidifier cylinder made of POLYSULPHON, durable, not broken when dropped, made sterile by autoclaving
There is a holder on the equipment hanging rail, can be moved to the desired position, suitable for use in emergency rooms and critical patient rooms

Wall-mounted chest suction unit

Adjustable suction rate from 0 – 30 cm/H2O
There is a water bottle to measure the suction rate from 0 – 30 cm/H2O
The bottle holds liquids and sputum of 1,800 cc. The bottle is clear and can be seen all around. There are lines indicating the amount of liquid. It can be sterilized by steam. Convenient for cleaning, with a hanging basket.

2-way WALL OUTLET connection kit, can be connected to oxygen flowmeter or ventilator in 2 ways.

The SILBERMANN Automatic changeover unit is designed for continuous supply of gas at the pressure of up to 8 bars.

Features

The SILBERMANN Automatic changeover unit is designed for continuous supply of gas at a pressure of up to 8 bars (higher outlet pressure upon customer request).
The panel includes a mechanism which switches the supply from the “in service” bank to a “reserve” supply bank, when the “in service” bank is empty. After rotating the lever and replacing
the empty bank cylinders, the previous “in service” becomes the “reserve” bank for the next operation.
The panel is equiped with two manifold pressure regulators (in case of malfunction), mid range gauge, line pressure regulators w/bypass valves, all mounted on a white baked painted steel panel.
Safety value@6 bar supplied with the panel.

Applicable standards:

Silbermann’s Quality management system:

The Silbermann jet scavenging inlet is designed for safe removal of surplus anaesthetic gas from the operating theatre.

The scavenging inlet assembly uses compressed air to create suction and propels the contaminated air to the outside atmosphere.

Features

Medical Gas System Standards:

Silbermann’s Quality Management System: