Secondary entrance door from the operating room to the washing room

Products > Operating Room, Operating Theatre

The secondary entrance door from the operating room to the hand washing room is designed for use in the operating room as a sliding door, brand MARKUS, model M5 or MARKRONOMIC, which is a European or American product. It has an opening size of 1,500 mm. x 2,100 mm. with a glass window size of 300 mm. x 300 mm. It is a hermetic sealing system. The top and sides of the door edge are installed with RUBBER SEALING PROFILE rubber sheets and the bottom edge of the door is installed with STRIP RIGID RUBBER SEAL rubber edges along the line with hanging rails to support the door. The sliding door runs on BALL RACES with NYLON wheels. There is a door handle made of aluminum. The door opens and closes automatically controlled by a MICRO PROCESSOR. MICRO PROCESSOR with elbow switch and NO TOUCH SWITCH. There is a SINGLE – BEAM PHOTO – ELECTRIC CELL safety system. If there is an obstacle at the door, the door will stop and open automatically in case of malfunction of the automatic open-close set or power outage. The door can be opened-closed with the door handle. The door is about 40 mm thick and can prevent noise of about 27 decibels. The door frame is made of SATIN ANODIZED EXTRUDED ALUMINIUM SATIN ANODIZED EXTRUDED ALUMINIUM. The door surface is covered with PLASTIC PLASTIC LAMINATE. The door frame and door are finished products from the same manufacturer. The main entrance door to the operating room has been tested according to the air leakage prevention standard AIR PERMEABILITY TEST SLIDING DOOR ANSI / UL 1784 or BS 476.

Note: The product is a MARKUS or KONE brand from the Netherlands.

Rigid Ceiling Columns

Medical gas distribution center and electrical outlets hanging from the ceiling, RIGID CEILING COLUMN for operating rooms, installed according to the appropriate design for the use of the operating room
This distribution center set has a structure made of EXTRUDED ANODIZED ALUMINUM and the surrounding surface is made of synthetic materials, 6 mm thick flat sheet, with the properties of not being a place for dust and preventing static electricity (ANTI-STATIC)
Does not absorb moisture and does not accumulate germs
Available in both FIX and non-up and down types and electrically up and down types
The distribution center set is a product certified by ISO 9001 and, CE MARK, ISO 14385, with general properties according to NFPA 99.

Oxygen Therapy Unit with Humidifier Rail Mounted

Oxygen and humidifier set hanging on equipment rail

Flowmeter, adjust oxygen flow rate 0 – 15 liters/minute
The housing is made of anodized aluminum, light weight
There is a dust filter inside the flowmeter
500 cc humidifier cylinder made of polysulfon (POLYSULPHON), durable, not broken, made free from germs by autoclaving
There is a check valve slot to release pressure when the pressure exceeds 2 PSI or 40 mm/Hg
There is a holder on the equipment hanger to move back and forth to the desired position

Suction Unit Wall Mounted

Wall-mounted sputum suction unit for patients

Adjustable suction rate 0 – 760 mm/Hg or 0 – 200 mm/Hg
With overflow bottle (TRAP BOTTLE) to prevent liquid from overflowing into the system. The bottle is made of durable polysulfone, does not break when dropped
The bottle holds 1,800 cc of liquid and sputum. The bottle is clear and can be seen all around. There are lines indicating the amount of liquid. Can be sterilized by steam, convenient for cleaning, with a hanging basket.

Power LED Surgical Light

Illumination 100,000 lux – 110,000 lux
Color Temperature 3,800 K
LED Bulb / Ambient Light
Lamp Life 40,000 hrs.
Complies with Laminar Flow System
With AIM (Automatic Illumination Management) System

AIR PLENUM WITH LOW TURBULANCE DISPLACEMENT FLOW

LAMINAR FLOW SUPPLY Clean Air Supply Panel Set for Operating Rooms The clean air supply panel set is designed for use in operating rooms that require high cleanliness and has an air supply characteristic as an air curtain. The wind speed is approximately 0.25 M/S (LAMINAR FLOW). It is installed above the operating table to prevent infection (PROTECTION CLEAN ZONE) according to the standards EN ISO 14644-1, ONORM H 6020, DIN1946 and VDC 2083.

The clean air supply panel consists of

The structure (HOUSING STRUCTURE) is made of aluminum both inside and outside through the anti-corrosion treatment with RAL 9010 baking paint.
High-efficiency air filter (HEPA FILTER)
Lighting system (BACKGROUND ILLUMINATION)
LAMINAR air distribution panel (LAMINARISATOR)

Technical features

CASING DIMENSIONS 2,506 MM x 2,506 MM x 420 MM
PROTECTION ZONE 4.4 m2
NUMBER OF FILTERS 4 PCS
INITIAL FILTER PRESSURE 175 Pa
NOMINAL VOLUME FLOW 5,180 m3/h
AIRFLOW VELOCITY OF 0.25 M/s

Jet Scavenging Outlet Assembly

JET SCAVENGING type using AIR COMPRESSOR as a driving force to create a vacuum to drain excess gas from the anesthesia machine.
VACUUM STRENGTH can be adjusted from 5 – 15 centimeters/water (VACUUM CAPACITY UP TO 70 LPM.)
There is a GREEN PNEUMATIC INDICATOR signal system to show the operating status of the anesthesia machine.
SCAVENGING FLEXIBLE HOSE set, size 19 – 22 mm., length 4 meters with internal coil to prevent compression.
Equipment and safety standards DIN STANDARD, NFPA 99, CE mark, ISO 14385, ISO 9001
Injector-Vanturi gas purging system
Suction force can be adjusted by special tools
Increased safety for personnel in the operating room
DIN standard