Vacuum Breaker Unit Wall Mounted

Products > Medical Gas, Oxygen & Suction Unit

Wall-mounted chest suction unit

Adjustable suction rate from 0 – 30 cm/H2O
There is a water bottle to measure the suction rate from 0 – 30 cm/H2O
The bottle holds liquids and sputum of 1,800 cc. The bottle is clear and can be seen all around. There are lines indicating the amount of liquid. It can be sterilized by steam. Convenient for cleaning, with a hanging basket.

Modular O.R. & Hybrid O.R.

The walls and ceiling of the operating room are prefabricated (TRESPA), do not collect dust and germs, ANTIBACTERIA, prevent static electricity
The operating room floor is a roll of CONDUCTTIVE rubber tiles
The operating room door is a hermetic sealing type, SLIDING DOOR
The air conditioning system for the clean room CLEAN ROOM CLASS 1,000 with a temperature and humidity control system, has a clean air supply head with a HEPA FILTER with an efficiency of 99.97%

Designed for use in ICU, CCU and emergency rooms. Convenient to use and provides good patient care.
Can install medical gas system equipment with sockets, electrical equipment, telephone, TV, etc.
Can install medical equipment and adjust up and down as needed.
Can install EKG MONITOR, BLOOD PRESSURE, IV POLE panel set, various solution infusion machines, INFUSION PUMP, TRAY, CATHETER HOLDER, AMBU BAG HOLDER, GAS OUTLET, EE Socket and other equipment, etc.
The main structure is made of EXTRUDE ALUMINUM, strong and durable. The surface plate is made of special material TRESPA? Resistant to acids – alkalis, dust does not stick, Anti-Static, prevents the spread of bacteria on the surface plate.
There are 5 – 10 electrical outlets (DUPLEX), and there are spaces for NURSE CALL telephone lines and EKG signal lines. Medical gas outlets can be selected according to needs, such as Wall Outlet 2 Oxygen, 1 Air, 2 Vacuum, 2 Slide
Equipment and safety standards NFPA 99, CE KARK, ISO 9001 have general properties according to NFPA 99 standards.
Install gas system with sockets, electrical equipment, telephone, TV, etc.
Install IV POLE panel set, various solution dispensers, TRAY and other equipment such as MONITOR
The surface uses TRESPA material, which is acid-resistant and does not collect dust and bacteria.

Medical gas distribution center and electrical outlets hanging from the ceiling, RIGID CEILING COLUMN for operating rooms, installed according to the appropriate design for the use of the operating room
This distribution center set has a structure made of EXTRUDED ANODIZED ALUMINUM and the surrounding surface is made of synthetic materials, 6 mm thick flat sheet, with the properties of not being a place for dust and preventing static electricity (ANTI-STATIC)
Does not absorb moisture and does not accumulate germs
Available in both FIX and non-up and down types and electrically up and down types
The distribution center set is a product certified by ISO 9001 and, CE MARK, ISO 14385, with general properties according to NFPA 99.

Illumination power 100,000 lux – 120,000 lux
Prism system / halogen bulb
Colour Temperature 3,300 K
Colour Rendering Index 95 Ra
ACS (Automatic Compensated Suspention) surgical lamp arm can be rotated vertically 210 degrees
Equipped with a Camera Zoom camera that can record images 36 times (Optical)

Oxygen and humidifier set with adjustable percentage hanging on equipment rail

Flowmeter can adjust oxygen flow rate 0 – 15 liters / minute
There is a dust filter set inside the flowmeter
The spray bottle can be adjusted to 3 levels: 40%, 70% and 100%
There is a slot for a HEATER for heating
There is a check valve slot to release pressure when the pressure exceeds 2 PSI or 40 mm / Hg
500 cc humidifier cylinder made of POLYSULPHON, durable, not broken when dropped, made sterile by autoclaving
There is a holder on the equipment hanging rail, can be moved to the desired position, suitable for use in emergency rooms and critical patient rooms