Plastic Tubing Flexible Transparant Non-Toxic For Medical Gas

Products > Medical Gas, Oxygen & Suction Unit

Pressure resistant rubber tubing for medical gas systems

Plastic Flexible Tubing, pressure resistant hose for medical gas systems, anti-static hose type

PDF Download

Recessed (Wall) Service Outlet Quick-Connect DISS Type

We design and manufacture our Terminal Units to last and to ensure a constant and reliable medical gas flow for the patient and the medical equipment.

All outlets are 100 % tested for flow, leakage and are cleaned for oxygen services prior to shipping

Features & Benefits

Accepts DISS gas specific adapters.
All outlets are 100% hydrostatic tested for leaks. The outlets are factory assembled, degreased and cleaned for medical gas service.
Indexed to eliminate interchangeability of gas services.
360 swivel inlet pipe for ease of installation.
Safe plug-in & release allowing parking of male adapter on the outlet thread without pressure applied.
Low maintenance due to use of VITON seals in front assembly (latch value).
Modular singles – designed to provide ganging of rough-in modules in the field to form multiples at any order with 120mm spacing.

Medical Gas System Standards:

NFPA99, EN ISO 7396-1 & G0-1 requirements..

Applicable Standards:

NFPA99, ISO 9170-1, CGA-V5.

Silbermann’s Quality Management System:

EN ISO 13485-2016
ISO 9001-2015

Ball Valve with Extensions Model SP150

Cleaned for medical gas use and 100% hydrostatic tested, these 3 piece medical gas valves are designed to meet the NFPA 99c, ISO 7396-1 & G-01 standards.

Specifications

Valve shall be 3 piece ball-type full bore design, with a bronze/ brass body, stainless steel ball, stem, bolts & nuts.
Seat shall be Teflon (RPTFE) and seals Viton.
Valves ½” to 2” shall have a minimum pressure rating of 4137 kpa (600 psi) wog.Valves 3” to 4” shall have a minimum pressure rating of 2758 kpa (400 psi) wog.
Valve shall require only a quarter turn from fully open position to a fully closed position.
Extensions stubs shall be K type with a minimum 150 mm long to allow brazing without damaging the valve seat and seals due to heat transfer during brazing operati
Each valve shall be hydrostatically tested for leakages.
Each valve shall be washed and degreased for medical gas use.
Pipe stubs extensions shall be capped at both ends.
The valves shall be supplied in sealed plastic bags, marked with “Oxygen” or “cleaned for oxygen use”, to prevent contamination prior to installation.
Valves shall be Silbermann model SP150 or equivalent.
All valves shall comply with NFPA 99, ISO 7396-1 & G-01 standards.

Medical Gas System Standards:

NFPA99, EN ISO 7396-1 & G-01 requirements.

Silbermann’s Quality Management System:

EN ISO 13485-2016
ISO 9001-2015. Medical Gas System Standards:

Oxygen Therapy Unit (Nebulizer) Wall-mounted oxygen and humidifier unit with adjustable percentage spraying

FLOW METER can adjust oxygen flow rate 0-15 liters / minute
The body is made of anodized aluminum, light weight
There is a dust filter inside the flowmeter
Nebulizer can be adjusted to 3 levels 40%, 70% and 100%
There is a slot for a HEATER for heating
There is a check valve slot to release pressure When the pressure is more than 2 PSI or 40 mm / Hg
500 cc humidifier cylinder made of polysulfon (POLYSULPHON), durable, not broken, the cylinder can be sterilized by autoclaving

Oxygen Therapy Unit ( Nebulizer ) Rail Mounted

Oxygen and humidifier set with adjustable percentage hanging on equipment rail

Flowmeter can adjust oxygen flow rate 0 – 15 liters / minute
There is a dust filter set inside the flowmeter
The spray bottle can be adjusted to 3 levels: 40%, 70% and 100%
There is a slot for a HEATER for heating
There is a check valve slot to release pressure when the pressure exceeds 2 PSI or 40 mm / Hg
500 cc humidifier cylinder made of POLYSULPHON, durable, not broken when dropped, made sterile by autoclaving
There is a holder on the equipment hanging rail, can be moved to the desired position, suitable for use in emergency rooms and critical patient rooms

An innovative 12” touch screen area & main alarm panel monitors and displays the local & remote (Manifold Systems) medical gas information as required by the latest additions of NFPA99, EN ISO 7396-1 and HTM02-01.

The new Silbermann touch screen alarm panel incorporates state of the art Hi security technology, protecting the information displayed and transmitted, from malicious attacks

Features

LCD 12” touch screen display.
Display of 1-6 local gases/ gauges alarms together with 1-18 remote digital alarms on screen.
Aesthetics & smooth design without buttons for infection control.
Secured Ethernet based network communication between all units.
Unique secured authentication of each unit to avoid fake/masking of alarms.
Remote viewing through mobile device or remote computer.
Gas specific sensor with DISS nut and nipple to avoid mechanical cross connection.
For Future Use- disables a gas alarm untill the gas pipeline infrastructure is complete.
Multi linguistic- Supports English, Spanish, Russian, Arabic & Chinese.
Commissioning for local gas/ gauges – Enables to identify gas leaks before commission.
Gauges color trend arc showing the gas pressure status.
Expandable digital menuMenu expands automatically in case of an alarm within it in order to show that alarm.
Adjustable digital alarms color (Red/ Yellow).
Enable/ Disable of digital alarm.
Adjustable digital alarm type (NO/ NC).
Automatic adjustment of screen brightness (day & night mode).
Self diagnostics with error display for problem identification.
Event logging, recording all alarms and panel activities.
Periodical maintenance alert.
Customizable text for digital alarms & panel location.
Remote monitoring dry contacts of gas pressure alarm condition including:
- High & Low alert,
- Below Min alert,
- Any Alarm.
Hinged panel opening for easy installation and maintenance.
On-site adjustment of HI and LOW set-points for each Gas & gas units.
Highly accurate solid state pressure piezo-resistive transducer.
Built-In relay for remote annunciator applications.
Gas specific digital sensors mounted locally or remotely, up to 1500m, utilizing 22 gauge twisted pair.
Wifi communication available.
Remote monitoring (Via TCP/IP Modbus) through building management system available.

Applicable Standards

Medical Gas Systems: NFPA99,
EN ISO 7396-1 & HTM02-01 requirements.

Medical Air Compressor System

Medical compressed air generator AIR COMPRESSOR SYSTEM

Oil-less 2-stage pump
Maximum pressure 8-10 Bars
Low operating speed
Durable for heavy use
Easy maintenance
Come with a temperature reduction set for cooling in the machine
Come with internal cooling fan for long-term use
ISO 9001 standard (Rank Case)