Products > Operating Theatre, Surgical Light
Axcel Surgical Light

Axcel Surgical Light

axcel-001
  • Illumination 100,000 lux
  • Color Temperature  3,500 K
  • Color Rendering Index  95  Ra
  • The system is a combined light system with glass and lenses
  • Halogen bulbs / LED bulbs  (Ambient  Light)
  • Can change bulbs quickly and conveniently without using tools

PDF Download

Featured Products

See All
Bubble-Jet-Bottle-001

Bubble Jet Bottle

Humidifier and mist bottle

  • Humidifier and spray bottle (Bubble Jet) size 500 cc.
  • Made of polysulfone (POLYSULPHON), durable, not broken when dropped. The atomizer can be removed for cleaning in case of clogging.
  • The bottle can be sterilized by autoclaving.
  • There is a check valve slot to release pressure when the pressure exceeds 2 PSI or 40 mm/Hg.
Oxygen-Therapy-Unit-with-Humidifier-001

Oxygen Therapy Unit with Humidifier Rail Mounted

Oxygen and humidifier set hanging on equipment rail

  • Flowmeter, adjust oxygen flow rate 0 – 15 liters/minute
  • The housing is made of anodized aluminum, light weight
  • There is a dust filter inside the flowmeter
  • 500 cc humidifier cylinder made of polysulfon (POLYSULPHON), durable, not broken, made free from germs by autoclaving
  • There is a check valve slot to release pressure when the pressure exceeds 2 PSI or 40 mm/Hg
  • There is a holder on the equipment hanger to move back and forth to the desired position
Plastic-Tubing-Flexible-001

Plastic Tubing Flexible Transparant Non-Toxic For Medical Gas

Pressure resistant rubber tubing for medical gas systems

  • Plastic Flexible Tubing, pressure resistant hose for medical gas systems, anti-static hose type
Ball-Valve-Model-SP150-001

Ball Valve with Extensions Model SP150

Cleaned for medical gas use and 100% hydrostatic tested, these 3 piece medical gas valves are designed to meet the NFPA 99c, ISO 7396-1 & G-01 standards.

Specifications

  • Valve shall be 3 piece ball-type full bore design, with a bronze/ brass body, stainless steel ball, stem, bolts & nuts.
  • Seat shall be Teflon (RPTFE) and seals Viton.
  • Valves ½” to 2” shall have a minimum pressure rating of 4137 kpa (600 psi) wog.Valves 3” to 4” shall have a minimum pressure rating of 2758 kpa (400 psi) wog.
  • Valve shall require only a quarter turn from fully open position to a fully closed position.
  • Extensions stubs shall be K type with a minimum 150 mm long to allow brazing without damaging the valve seat and seals due to heat transfer during brazing operati
  • Each valve shall be hydrostatically tested for leakages.
  • Each valve shall be washed and degreased for medical gas use.
  • Pipe stubs extensions shall be capped at both ends.
  • The valves shall be supplied in sealed plastic bags, marked with “Oxygen” or “cleaned for oxygen use”, to prevent contamination prior to installation.
  • Valves shall be Silbermann model SP150 or equivalent.
  • All valves shall comply with NFPA 99, ISO 7396-1 & G-01 standards.

Medical Gas System Standards:

  • NFPA99, EN ISO 7396-1 & G-01 requirements.

Silbermann’s Quality Management System:

  • EN ISO 13485-2016
    ISO 9001-2015. Medical Gas System Standards:
PRISMALIX-001

Prismalix Surgical Light

  • Illumination power 100,000 lux – 120,000 lux
  • Prism system / halogen bulb
  • Colour Temperature 3,300 K
  • Colour Rendering Index 95 Ra
  • ACS (Automatic Compensated Suspention) surgical lamp arm can be rotated vertically 210 degrees
  • Equipped with a Camera Zoom camera that can record images 36 times (Optical)
Automatic-Medical-Gas-001

Automatic Medical Gas Changeover Manifold Model MN

The SILBERMANN Automatic changeover unit is designed for continuous supply of gas at the pressure of up to 8 bars.

Features

  • The SILBERMANN Automatic changeover unit is designed for continuous supply of gas at a pressure of up to 8 bars (higher outlet pressure upon customer request).
  • The panel includes a mechanism which switches the supply from the “in service” bank to a “reserve” supply bank, when the “in service” bank is empty. After rotating the lever and replacing
  • the empty bank cylinders, the previous “in service” becomes the “reserve” bank for the next operation.
  • The panel is equiped with two manifold pressure regulators (in case of malfunction), mid range gauge, line pressure regulators w/bypass valves, all mounted on a white baked painted steel panel.
  • Safety value@6 bar supplied with the panel.

Applicable standards:

  • NFPA99, EN ISO 73961-1 & G0-1 requirements.

Silbermann’s Quality management system:

  • ISO 13485
  • CE marked by the notified body TUV-SUD

Contact Us

J.E.P. enterprise,co.ltd

  • 235/8 21 สุขุมวิท 21 (อโศก) แขวงคลองเตยเหนือ เขตวัฒนา กรุงเทพมหานคร 10110
  • 02 258 0447
  • info@jep.co.th

Useful Links

Follow Us

Facebook Line

© Copyright J.E.P. enterprise,co.ltd 2024.