Bubble Jet Bottle

Products > Medical Gas, Oxygen & Suction Unit

Bubble Jet Bottle

Humidifier and mist bottle

Humidifier and spray bottle (Bubble Jet) size 500 cc.
Made of polysulfone (POLYSULPHON), durable, not broken when dropped. The atomizer can be removed for cleaning in case of clogging.
The bottle can be sterilized by autoclaving.
There is a check valve slot to release pressure when the pressure exceeds 2 PSI or 40 mm/Hg.

Oxygen Therapy Unit ( Nebulizer ) Rail Mounted

Oxygen and humidifier set with adjustable percentage hanging on equipment rail

Flowmeter can adjust oxygen flow rate 0 – 15 liters / minute
There is a dust filter set inside the flowmeter
The spray bottle can be adjusted to 3 levels: 40%, 70% and 100%
There is a slot for a HEATER for heating
There is a check valve slot to release pressure when the pressure exceeds 2 PSI or 40 mm / Hg
500 cc humidifier cylinder made of POLYSULPHON, durable, not broken when dropped, made sterile by autoclaving
There is a holder on the equipment hanging rail, can be moved to the desired position, suitable for use in emergency rooms and critical patient rooms

FLOW METER can adjust oxygen flow rate 0-15 liters / minute
The body is made of anodized aluminum, light weight
There is a dust filter inside the flowmeter
Nebulizer can be adjusted to 3 levels 40%, 70% and 100%
There is a slot for a HEATER for heating
There is a check valve slot to release pressure When the pressure is more than 2 PSI or 40 mm / Hg
500 cc humidifier cylinder made of polysulfon (POLYSULPHON), durable, not broken, the cylinder can be sterilized by autoclaving

Oxygen flowmeter 0- 15 liters/minute with check valve for ventilator, wall mounted

MICRO PROCESSOR control system
Light and sound warning system
Maximum flow rate of 4500 and 9800 SCFH
With HIGH PRESSURE set to filter dust before entering the REGULATOR
Oxygen supply control panel set, Nitrous Oxide, Carbon Dioxide, Nitrogen and other gases are WALL MOUNTED DUPLEX MANIFOLD controlled by MICROPROCESSOR type, automatic control
Automatic control set (FULLY AUTOMATIC CHANGE OVER UNIT ) with BY- PASSED VALVE can control the MANUAL operation in case the control set malfunctions
Automatic set controlled by microprocessor system (MICROPROCESSOR CONTROL)
Easy to maintain has HIGH PRESSURE FILTER for filtering dust in each of the two HEADERs before entering REGULATOR
provides a maximum flow rate of 4500 and 9800 SCFH
Certified for production standards according to ISO 9001 and ISO 14385, CE MARK

500 cc humidifier cylinder made of POLYSULPHON, durable, not broken if dropped
The cylinder can be sterilized by autoclaving
There is a check valve to release pressure when the pressure exceeds 2 PSI or 40 mm/Hg