Oxygen Portable Outlet

Products > Medical Gas, Oxygen & Suction Unit

Quick plug outlet for ceiling mounting

Silbermann , Ohio Type consists of Primary and Secondary check valves with threaded connections The hose is 1/4? NPT for use with surgical supply line sets

Axcel Surgical Light

FLOW METER can adjust the oxygen flow rate from 0-15 liters/minute
The housing is made of anodized aluminum, light weight
There is a dust filter inside the flowmeter
The humidifier cylinder size 500 cc. is made of polysulfone (POLYSULPHON), durable, not broken when dropped. The cylinder can be sterilized by steam sterilization (AUTOCLAVEABLE)
There is a check valve slot to release pressure when the pressure exceeds 2 PSI or 40 mm/Hg

Valve box with a pull-out window and Valve box with an aluminium door

General Speciications

Zone valve box shall be Silbermann series.
Each recessed/exposed zone valve shall consist of a steel valve box constructed of 1.5 mm steel sheet, complete with a backed enamel inish RAL 9016, which can house single or multiple shut-off ball valves with the tube extensions.
Valves shall be a 3-piece forged brass and a 4 bolt design, bronze or brass body, stem, ball bolts and nuts shall be made of stainless steel , double seal, full port union balltype, with Telon (RPTFE) seats and Viton seals, with a pressure rating of 4080 kPa (600 psi) or 40.8 bars.
Valves shall be operated by a lever-type handle requiring anly a quarter turn from a fully opened to a fully closed position. All valves shall be equipped with type “K” washed and degreased copper pipe stub extensions of suficient length to protrude beyond the sides of the box.
All pipe stub extensions shall be supplied with suitable plugs or caps to prevent contamination of the assembly prior to installation.
Each valve shall be supplied with a medical gas identiication label.
Valves shall be available with or without line pressure gauges, as required. Gauges, shall be 50 mm diameter.
Pressure gauges shall read 0-1100 kPa (0-11 bar) for all gauges except Nitrogen, which shall read 0-2500 kPa (0-25 bar), and Vacuum, which shall read 0-100 kPa (0-760 mmHg).
There are two front options: an aluminum door or a pull-out removable window.

Oxygen flowmeter 0- 15 liters/minute, wall mounted

Wall-mounted chest suction unit

Adjustable suction rate from 0 – 30 cm/H2O
There is a water bottle to measure the suction rate from 0 – 30 cm/H2O
The bottle holds liquids and sputum of 1,800 cc. The bottle is clear and can be seen all around. There are lines indicating the amount of liquid. It can be sterilized by steam. Convenient for cleaning, with a hanging basket.