Plastic Tubing Flexible Transparant Non-Toxic For Medical Gas

Products > Medical Gas, Oxygen & Suction Unit

Pressure resistant rubber tubing for medical gas systems

Plastic Flexible Tubing, pressure resistant hose for medical gas systems, anti-static hose type

PDF Download

Ball Valve with Extensions Model SP150

Cleaned for medical gas use and 100% hydrostatic tested, these 3 piece medical gas valves are designed to meet the NFPA 99c, ISO 7396-1 & G-01 standards.

Specifications

Valve shall be 3 piece ball-type full bore design, with a bronze/ brass body, stainless steel ball, stem, bolts & nuts.
Seat shall be Teflon (RPTFE) and seals Viton.
Valves ½” to 2” shall have a minimum pressure rating of 4137 kpa (600 psi) wog.Valves 3” to 4” shall have a minimum pressure rating of 2758 kpa (400 psi) wog.
Valve shall require only a quarter turn from fully open position to a fully closed position.
Extensions stubs shall be K type with a minimum 150 mm long to allow brazing without damaging the valve seat and seals due to heat transfer during brazing operati
Each valve shall be hydrostatically tested for leakages.
Each valve shall be washed and degreased for medical gas use.
Pipe stubs extensions shall be capped at both ends.
The valves shall be supplied in sealed plastic bags, marked with “Oxygen” or “cleaned for oxygen use”, to prevent contamination prior to installation.
Valves shall be Silbermann model SP150 or equivalent.
All valves shall comply with NFPA 99, ISO 7396-1 & G-01 standards.

Medical Gas System Standards:

NFPA99, EN ISO 7396-1 & G-01 requirements.

Silbermann’s Quality Management System:

EN ISO 13485-2016
ISO 9001-2015. Medical Gas System Standards:

Vacuum Breaker Unit Wall Mounted

Wall-mounted chest suction unit

Adjustable suction rate from 0 – 30 cm/H2O
There is a water bottle to measure the suction rate from 0 – 30 cm/H2O
The bottle holds liquids and sputum of 1,800 cc. The bottle is clear and can be seen all around. There are lines indicating the amount of liquid. It can be sterilized by steam. Convenient for cleaning, with a hanging basket.

Prismalix Surgical Light

Illumination power 100,000 lux – 120,000 lux
Prism system / halogen bulb
Colour Temperature 3,300 K
Colour Rendering Index 95 Ra
ACS (Automatic Compensated Suspention) surgical lamp arm can be rotated vertically 210 degrees
Equipped with a Camera Zoom camera that can record images 36 times (Optical)

Operating room floor ANTISTATIC ANTIST

The operating room floor is HEAVY DUTY type rubber tile or scientific carpet in roll form with the properties of ANTISTATIC CONDUCTIVE VINYL FLOOR COVERING, brand ARMSTRONG or equivalent to EN 649 standards, approximately 2 meters wide and 2 millimeters thick. The tiles on the floor will be laid up to the walls, approximately 150 mm high. All seams will be seamlessly connected.

The Mazor-XT fully automatic changeover system is designed to meet the NFPA99, or EN ISO 7396-1, or HTM02-01 or G-01 standard.

The system manages 3 sources and provides continuous supply and smooth automatic bank switchover by means of pneumatic shuttle valve.

All medical gas information is displayed graphically and digitally on a 12” full HD LCD touch screen

Features & Benefits

Continuous supply and smooth automatic bank switchover, without pressure fluctuation, by means of pneumatic shuttle valve.
Maintenance friendly- designed to enable maintenance during operation without the need to distrupt the gas supply.
LCD 12” touch screen display.
Graphically & digitally display of the actual status of each source- “In use” or “Stand by”.
Visual & audio alarm signals in case of: low pressure in main source line, change between banks, “Below min” and High/Low line supply pressure.
Leak detection from manifolds.
Secured Ethernet based network communication between all units.
Unique secured authentication of each unit to avoid fake/masking of alarms.
Flow & Consumption – Monitors & displays flow rate and consumption of the medical gas*.
A color trend arc showing the gas pressure status on the main line and at each bank
Optional- display of heaters during idle and active states.
Heaters activated during manifold operation*.
Automatic adjustment of screen brightness (day & night mode).
Log History File- Event logging, recording all alarms and panel activities.
Periodical maintenance alert.
Commissioning- Pressure test.
Customizable text & language.
Test & mute buzzer buttons.
Advanced Communication:
- TCP/ IP Modbus
- Remote monitoring through building management system available.
- Option for remote viewing through mobile device or remote computer.

Silbermann’s Quality Management System:

EN ISO 13485-2016
ISO 9001-2015

Medical Gas Main Alarm Panel

This colorful 12” touch screen main alarm panel monitors and displays the medical gas source equipment information as required by the latest additions of NFPA99, EN ISO 7396-1 and HTM02-01.

The new Silbermann touch screen main alarm panel incorporates state of the art Hi security technology, protecting the information displayed and transmitted, from malicious attacks.

Features

LCD 12” touch screen display.
Display of up to 62 alarms on screen.
Aesthetics & smooth design without buttons for infection control.
Secured Ethernet based network communication between all units.
Unique secured authentication of each unit to avoid fake/masking of alarms.
Automatic adjustment of screen brightness (day & night mode).
Self diagnostics with error display for problem identification.
Event logging, recording all alarms and panel activities.
Periodical maintenance alert.
Customizable text & language for alarms text.
Adjustable alert display- No vacant fields regardless to the No. of alerts.
Adjustable alert display- managing the alarm display for alerts that require high priority.
Adjustable digital alarms color (Red/ Yellow).
Enable/ Disable of digital alarm.
Adjustable digital alarm type (NO/ NC).
Automatic adjustment of screen brightness (day & night mode).
Remote monitoring dry contacts of gas pressure alarm condition including:
- High & Low alert,
- Below Min alert,
- Any Alarm.
Hinged panel opening for easy installation and maintenance.
Built-In relay for remote annunciator applications.
Advanced Communication:
- Remote viewing through mobile device or remote computer.
- Wifi communication available.
- Remote monitoring (Via TCP/IP ModBus) through building management system available.
- Remote monitoring dry contacts of High and Low gas pressure alarm condition.