Cleaned for medical gas use and 100% hydrostatic tested, these 3 piece medical gas valves are designed to meet the NFPA 99c, ISO 7396-1 & G-01 standards.
Specifications
- Valve shall be 3 piece ball-type full bore design, with a bronze/ brass body, stainless steel ball, stem, bolts & nuts.
- Seat shall be Teflon (RPTFE) and seals Viton.
- Valves ½” to 2” shall have a minimum pressure rating of 4137 kpa (600 psi) wog.Valves 3” to 4” shall have a minimum pressure rating of 2758 kpa (400 psi) wog.
- Valve shall require only a quarter turn from fully open position to a fully closed position.
- Extensions stubs shall be K type with a minimum 150 mm long to allow brazing without damaging the valve seat and seals due to heat transfer during brazing operati
- Each valve shall be hydrostatically tested for leakages.
- Each valve shall be washed and degreased for medical gas use.
- Pipe stubs extensions shall be capped at both ends.
- The valves shall be supplied in sealed plastic bags, marked with “Oxygen” or “cleaned for oxygen use”, to prevent contamination prior to installation.
- Valves shall be Silbermann model SP150 or equivalent.
- All valves shall comply with NFPA 99, ISO 7396-1 & G-01 standards.
Medical Gas System Standards:
- NFPA99, EN ISO 7396-1 & G-01 requirements.
Silbermann’s Quality Management System:
- EN ISO 13485-2016
ISO 9001-2015. Medical Gas System Standards:
