Products > Medical Gas, Oxygen & Suction Unit
Humidifier Bottle

Humidifier Bottle

Humidifier-Bottle-001
  • 500 cc humidifier cylinder made of POLYSULPHON, durable, not broken if dropped
  • The cylinder can be sterilized by autoclaving
  • There is a check valve to release pressure when the pressure exceeds 2 PSI or 40 mm/Hg

PDF Download

Featured Products

See All
Recessed-Diamond-type-001

Recessed (Wall) Service Outlet Quick-Connect Sil-Ohio Diamond Type

We design and manufacture our Terminal Units to last and to ensure a
constant and reliable medical gas flow for the patient and the medical
equipment.

All outlets are 100% tested for flow, and leakage.
They are cleaned for oxygen services before shipping.
Our outlets are designed by industrial designers to ensure an appealing
and pleasant environment for the patient and the medical staff.

Features

  • Accepts Sil-Ohio (Diamond type) gas specific outlets.
  • All outlets are 100% hydrostatic tested for leaks. The outlets are factory assembled, degreased and cleaned for medical gas service.
  • Indexed to eliminate interchangeability of gas services.
  • 360 swivel inlet pipe for ease of installation.
  • Low maintenance due to use of VITON seals in front assembly (latch valve).
  • Modular singles – designed to provide ganging of rough-in modules in the field to form multiples at any order with 120mm spacing.

Medical Gas System Standards:

  • NFPA99, EN ISO 7396-1 requirements.

Applicable Standards:

  • NFPA99
  • ISO 9170-1.

Silbermann’s Quality Management System:

  • CE marked by the notified body TÜV-SÜD.
Oxygen-Therapy-Unit-Nebulize-001

Oxygen Therapy Unit ( Nebulizer ) Rail Mounted

Oxygen and humidifier set with adjustable percentage hanging on equipment rail

  • Flowmeter can adjust oxygen flow rate 0 – 15 liters / minute
  • There is a dust filter set inside the flowmeter
  • The spray bottle can be adjusted to 3 levels: 40%, 70% and 100%
  • There is a slot for a HEATER for heating
  • There is a check valve slot to release pressure when the pressure exceeds 2 PSI or 40 mm / Hg
  • 500 cc humidifier cylinder made of POLYSULPHON, durable, not broken when dropped, made sterile by autoclaving
  • There is a holder on the equipment hanging rail, can be moved to the desired position, suitable for use in emergency rooms and critical patient rooms
Rail-Clamp-And-Universal-Clamp-001

Rail Clamp And Universal Clamp

A device hanging rail clamp

  • Equipment holder with medical equipment hanging rail for emergency rooms and intensive care rooms. The attached equipment can be moved horizontally.
axcel-001

Axcel Surgical Light

  • Illumination 100,000 lux
  • Color Temperature  3,500 K
  • Color Rendering Index  95  Ra
  • The system is a combined light system with glass and lenses
  • Halogen bulbs / LED bulbs  (Ambient  Light)
  • Can change bulbs quickly and conveniently without using tools
zone-valve-box-001

Zone Valve Box

Valve box with a pull-out window and Valve box with an aluminium door

General Speciications

  • Zone valve box shall be Silbermann series.
  • Each recessed/exposed zone valve shall consist of a steel valve box constructed of 1.5 mm steel sheet, complete with a backed enamel inish RAL 9016, which can house single or multiple shut-off ball valves with the tube extensions.
  • Valves shall be a 3-piece forged brass and a 4 bolt design, bronze or brass body, stem, ball bolts and nuts shall be made of stainless steel , double seal, full port union balltype, with Telon (RPTFE) seats and Viton seals, with a pressure rating of 4080 kPa (600 psi) or 40.8 bars.
  • Valves shall be operated by a lever-type handle requiring anly a quarter turn from a fully opened to a fully closed position. All valves shall be equipped with type “K” washed and degreased copper pipe stub extensions of suficient length to protrude beyond the sides of the box.
  • All pipe stub extensions shall be supplied with suitable plugs or caps to prevent contamination of the assembly prior to installation.
  • Each valve shall be supplied with a medical gas identiication label.
  • Valves shall be available with or without line pressure gauges, as required. Gauges, shall be 50 mm diameter.
  • Pressure gauges shall read 0-1100 kPa (0-11 bar) for all gauges except Nitrogen, which shall read 0-2500 kPa (0-25 bar), and Vacuum, which shall read 0-100 kPa (0-760 mmHg).
  • There are two front options: an aluminum door or a pull-out removable window.
AIR-PLENUM-Marchhart-001

AIR PLENUM WITH LOW TURBULANCE DISPLACEMENT FLOW

LAMINAR FLOW SUPPLY Clean Air Supply Panel Set for Operating Rooms The clean air supply panel set is designed for use in operating rooms that require high cleanliness and has an air supply characteristic as an air curtain. The wind speed is approximately 0.25 M/S (LAMINAR FLOW). It is installed above the operating table to prevent infection (PROTECTION CLEAN ZONE) according to the standards EN ISO 14644-1, ONORM H 6020, DIN1946 and VDC 2083.

The clean air supply panel consists of

  • The structure (HOUSING STRUCTURE) is made of aluminum both inside and outside through the anti-corrosion treatment with RAL 9010 baking paint.
  • High-efficiency air filter (HEPA FILTER)
  • Lighting system (BACKGROUND ILLUMINATION)
  • LAMINAR air distribution panel (LAMINARISATOR)

Technical features

  • CASING DIMENSIONS 2,506 MM x 2,506 MM x 420 MM
  • PROTECTION ZONE 4.4 m2
  • NUMBER OF FILTERS 4 PCS
  • INITIAL FILTER PRESSURE 175 Pa
  • NOMINAL VOLUME FLOW 5,180 m3/h
  • AIRFLOW VELOCITY OF 0.25 M/s

Contact Us

J.E.P. enterprise,co.ltd

  • 235/8 21 สุขุมวิท 21 (อโศก) แขวงคลองเตยเหนือ เขตวัฒนา กรุงเทพมหานคร 10110
  • 02 258 0447
  • info@jep.co.th

Useful Links

Follow Us

Facebook Line

© Copyright J.E.P. enterprise,co.ltd 2024.