Products > Medical Gas, Medical Vacuum Pumps
Medical Vacuum Pump System

Medical Vacuum Pump System

Vacuum-pump-system-001

Rotary vane vacuum pumps with oil-lubricated

  • Rotary pump with Oil-injection system
  • Internal lubrication system
  • Low noise level during operation
  • Durable for heavy use
  • Easy maintenance

PDF Download

Featured Products

See All
zone-valve-box-001

Zone Valve Box

Valve box with a pull-out window and Valve box with an aluminium door

General Speciications

  • Zone valve box shall be Silbermann series.
  • Each recessed/exposed zone valve shall consist of a steel valve box constructed of 1.5 mm steel sheet, complete with a backed enamel inish RAL 9016, which can house single or multiple shut-off ball valves with the tube extensions.
  • Valves shall be a 3-piece forged brass and a 4 bolt design, bronze or brass body, stem, ball bolts and nuts shall be made of stainless steel , double seal, full port union balltype, with Telon (RPTFE) seats and Viton seals, with a pressure rating of 4080 kPa (600 psi) or 40.8 bars.
  • Valves shall be operated by a lever-type handle requiring anly a quarter turn from a fully opened to a fully closed position. All valves shall be equipped with type “K” washed and degreased copper pipe stub extensions of suficient length to protrude beyond the sides of the box.
  • All pipe stub extensions shall be supplied with suitable plugs or caps to prevent contamination of the assembly prior to installation.
  • Each valve shall be supplied with a medical gas identiication label.
  • Valves shall be available with or without line pressure gauges, as required. Gauges, shall be 50 mm diameter.
  • Pressure gauges shall read 0-1100 kPa (0-11 bar) for all gauges except Nitrogen, which shall read 0-2500 kPa (0-25 bar), and Vacuum, which shall read 0-100 kPa (0-760 mmHg).
  • There are two front options: an aluminum door or a pull-out removable window.
quick-connect-002

Oxygen Therapy Unit with Humidifier Wall Mounted

  • FLOW METER can adjust the oxygen flow rate from 0-15 liters/minute
  • The housing is made of anodized aluminum, light weight
  • There is a dust filter inside the flowmeter
  • The humidifier cylinder size 500 cc. is made of polysulfone (POLYSULPHON), durable, not broken when dropped. The cylinder can be sterilized by steam sterilization (AUTOCLAVEABLE)
  • There is a check valve slot to release pressure when the pressure exceeds 2 PSI  or  40 mm/Hg
Vacuum-Breaker-Unit-Wall-Mounted-001

Vacuum Breaker Unit Wall Mounted

Wall-mounted chest suction unit

  • Adjustable suction rate from 0 – 30 cm/H2O
  • There is a water bottle to measure the suction rate from 0 – 30 cm/H2O
  • The bottle holds liquids and sputum of 1,800 cc. The bottle is clear and can be seen all around. There are lines indicating the amount of liquid. It can be sterilized by steam. Convenient for cleaning, with a hanging basket.
Suction-Unit-Wall-Mounted-001

Suction Unit Wall Mounted

Wall-mounted sputum suction unit for patients

  • Adjustable suction rate 0 – 760 mm/Hg or 0 – 200 mm/Hg
  • With overflow bottle (TRAP BOTTLE) to prevent liquid from overflowing into the system. The bottle is made of durable polysulfone, does not break when dropped
  • The bottle holds 1,800 cc of liquid and sputum. The bottle is clear and can be seen all around. There are lines indicating the amount of liquid. Can be sterilized by steam, convenient for cleaning, with a hanging basket.
Ceiling-Mounted-Flexible-Hose-001

Ceiling Mounted Flexible Hose

Ceiling Mounted Flexible Hoses are used for delivering gas through a retractable hose in large rooms like OT’s.

On one end, this hose assembly is connected to the ceiling gas outlet with a DISS/Nist fitting that is suitable for the required gas type. On the other end, it is connected to a portable gas outlet that has the same gas coding as the ceiling outlet.

A pulley (key back) is attached to the hose to easily adjust its height according to the user’s needs.

Features

  • A quick connect outlet with flexibility in use – you can pull the hose down with its connecting adapter and then release it, to move back to its original place.
  • Cost-effective – alternative for using pendants in OTs.
  • Fits for rooms where it is difficult to install outlets in the side walls.

Technical Data

  • Hose length:
    • maximum extension – 1.65 m
    • retractable position – 1.20 m
  • Available for all medical gases: Oxygen, Vacuum, Medical Air, Nitrous-Oxide N2 and Co2.
  • Portable gas outlets that can be attached to the hose are available in several standards including DIN, ENV, Sil-Ohio, Puritan Bennett, Chemetron, and British standard*.
  • Retractable hoses work with a pulley (key back).
  • Each medical gas outlet and hose has a gas coding to avoid inappropriate gas usage.

Medical Gas System Standards:

  • NFPA 99, EN ISO 7396-1 & GO-1, HTM 02-01 requirements

Applicable Standards:

  • NFPA 99, ISO 9170-1, ISO 5359

Silbermann’s Quality Management System:

  • EN ISO 13485-2016, ISO 9001-2015

* Other types of portable outlets are available by customers’ request

Medical-Gas-Area-Alarm-Panel-001

Medical Gas Area Alarm Panel

An innovative 12” touch screen area alarm panel monitors and displays the local medical gas information as required by the latest additions of NFPA99, EN ISO 7396-1 and HTM02-01.

The new Silbermann touch screen alarm panel incorporates state of the art Hi security technology, protecting the information displayed and transmitted, from malicious attacks

Features

  • LCD 12” touch screen display.
  • Display of 1-10 gases alarms on screen.
  • Aesthetics & smooth design without buttons for infection control.
  • Secured Ethernet based network communication between all units.
  • Unique secured authentication of each unit to avoid fake/masking of alarms.
  • Remote viewing through remote computer.
  • Gas specific sensor with DISS nut and nipple to avoid mechanical cross connection.
  • For Future Use- disables a gas alarm untill the gas pipeline infrastructure is complete.
  • Multi linguistic- Available in English, Spanish, Russian, Arabic & Chinese.
  • Commissioning- Enables to identify gas leaks before commission.
  • A color trend arc showing the gas pressure status.
  • Automatic adjustment of screen brightness (day & night mode).
  • Self diagnostics with error display for problem identification.
  • Event logging, recording all alarms and panel activities.
  • Periodical maintenance alert.
  • Customizable text for panel location.
  • Highly accurate solid state pressure piezo-resistive transducer.
  • Hinged panel opening for easy installation and maintenance.
  • On-site adjustment of HI and LOW set-points for each Gas & gas units.
  • Built-In relay for remote annunciator applications.
  • Gas specific digital sensors mounted locally or remotely, up to 1500m, utilizing 12 gauge twisted pair.
  • Wifi communication available.
  • Remote monitoring (Via TCP/IP Modbus) through building management system available.

Applicable Standards

  • Medical Gas Systems: NFPA99,
  • EN ISO 7396-1 & HTM02-01 requirements.

Contact Us

J.E.P. enterprise,co.ltd

  • 235/8 21 สุขุมวิท 21 (อโศก) แขวงคลองเตยเหนือ เขตวัฒนา กรุงเทพมหานคร 10110
  • 02 258 0447
  • info@jep.co.th

Useful Links

Follow Us

Facebook Line

© Copyright J.E.P. enterprise,co.ltd 2024.