Products > Medical Gas, Medical Vacuum Pumps
Medical Vacuum Pump System

Medical Vacuum Pump System

Vacuum-pump-system-001

Rotary vane vacuum pumps with oil-lubricated

  • Rotary pump with Oil-injection system
  • Internal lubrication system
  • Low noise level during operation
  • Durable for heavy use
  • Easy maintenance

PDF Download

Featured Products

See All
Ball-Valve-Model-SP150-001

Ball Valve with Extensions Model SP150

Cleaned for medical gas use and 100% hydrostatic tested, these 3 piece medical gas valves are designed to meet the NFPA 99c, ISO 7396-1 & G-01 standards.

Specifications

  • Valve shall be 3 piece ball-type full bore design, with a bronze/ brass body, stainless steel ball, stem, bolts & nuts.
  • Seat shall be Teflon (RPTFE) and seals Viton.
  • Valves ½” to 2” shall have a minimum pressure rating of 4137 kpa (600 psi) wog.Valves 3” to 4” shall have a minimum pressure rating of 2758 kpa (400 psi) wog.
  • Valve shall require only a quarter turn from fully open position to a fully closed position.
  • Extensions stubs shall be K type with a minimum 150 mm long to allow brazing without damaging the valve seat and seals due to heat transfer during brazing operati
  • Each valve shall be hydrostatically tested for leakages.
  • Each valve shall be washed and degreased for medical gas use.
  • Pipe stubs extensions shall be capped at both ends.
  • The valves shall be supplied in sealed plastic bags, marked with “Oxygen” or “cleaned for oxygen use”, to prevent contamination prior to installation.
  • Valves shall be Silbermann model SP150 or equivalent.
  • All valves shall comply with NFPA 99, ISO 7396-1 & G-01 standards.

Medical Gas System Standards:

  • NFPA99, EN ISO 7396-1 & G-01 requirements.

Silbermann’s Quality Management System:

  • EN ISO 13485-2016
    ISO 9001-2015. Medical Gas System Standards:
Oxygen-Therapy-Unit-with-Humidifier-001

Oxygen Therapy Unit with Humidifier Rail Mounted

Oxygen and humidifier set hanging on equipment rail

  • Flowmeter, adjust oxygen flow rate 0 – 15 liters/minute
  • The housing is made of anodized aluminum, light weight
  • There is a dust filter inside the flowmeter
  • 500 cc humidifier cylinder made of polysulfon (POLYSULPHON), durable, not broken, made free from germs by autoclaving
  • There is a check valve slot to release pressure when the pressure exceeds 2 PSI or 40 mm/Hg
  • There is a holder on the equipment hanger to move back and forth to the desired position
Recessed-Diamond-type-001

Recessed (Wall) Service Outlet Quick-Connect Sil-Ohio Diamond Type

We design and manufacture our Terminal Units to last and to ensure a
constant and reliable medical gas flow for the patient and the medical
equipment.

All outlets are 100% tested for flow, and leakage.
They are cleaned for oxygen services before shipping.
Our outlets are designed by industrial designers to ensure an appealing
and pleasant environment for the patient and the medical staff.

Features

  • Accepts Sil-Ohio (Diamond type) gas specific outlets.
  • All outlets are 100% hydrostatic tested for leaks. The outlets are factory assembled, degreased and cleaned for medical gas service.
  • Indexed to eliminate interchangeability of gas services.
  • 360 swivel inlet pipe for ease of installation.
  • Low maintenance due to use of VITON seals in front assembly (latch valve).
  • Modular singles – designed to provide ganging of rough-in modules in the field to form multiples at any order with 120mm spacing.

Medical Gas System Standards:

  • NFPA99, EN ISO 7396-1 requirements.

Applicable Standards:

  • NFPA99
  • ISO 9170-1.

Silbermann’s Quality Management System:

  • CE marked by the notified body TÜV-SÜD.
CEILING-PENDANT-002

CEILING PENDANT

  • Supports up to 11 medical gas nozzles
  • Supports up to 18 electrical outlets
  • Supports a maximum weight of 350 kg.
  • Suitable for use in OR, ICU, LR, ER, RR rooms
  • The equipment shelf can rotate 360 ​​degrees
  • With CABLE MANAGEMENT system, with LED INSIDE system for MINIMALLY INVASIVE SURGERY work
quick-connect-002

Oxygen Therapy Unit with Humidifier Wall Mounted

  • FLOW METER can adjust the oxygen flow rate from 0-15 liters/minute
  • The housing is made of anodized aluminum, light weight
  • There is a dust filter inside the flowmeter
  • The humidifier cylinder size 500 cc. is made of polysulfone (POLYSULPHON), durable, not broken when dropped. The cylinder can be sterilized by steam sterilization (AUTOCLAVEABLE)
  • There is a check valve slot to release pressure when the pressure exceeds 2 PSI  or  40 mm/Hg
Plastic-Tubing-Flexible-001

Plastic Tubing Flexible Transparant Non-Toxic For Medical Gas

Pressure resistant rubber tubing for medical gas systems

  • Plastic Flexible Tubing, pressure resistant hose for medical gas systems, anti-static hose type

Contact Us

J.E.P. enterprise,co.ltd

  • 235/8 21 สุขุมวิท 21 (อโศก) แขวงคลองเตยเหนือ เขตวัฒนา กรุงเทพมหานคร 10110
  • 02 258 0447
  • info@jep.co.th

Useful Links

Follow Us

Facebook Line

© Copyright J.E.P. enterprise,co.ltd 2024.