Oxygen Therapy Unit ( Nebulizer ) Rail Mounted

Products > Medical Gas, Oxygen & Suction Unit

Oxygen and humidifier set with adjustable percentage hanging on equipment rail

Flowmeter can adjust oxygen flow rate 0 – 15 liters / minute
There is a dust filter set inside the flowmeter
The spray bottle can be adjusted to 3 levels: 40%, 70% and 100%
There is a slot for a HEATER for heating
There is a check valve slot to release pressure when the pressure exceeds 2 PSI or 40 mm / Hg
500 cc humidifier cylinder made of POLYSULPHON, durable, not broken when dropped, made sterile by autoclaving
There is a holder on the equipment hanging rail, can be moved to the desired position, suitable for use in emergency rooms and critical patient rooms

PDF Download

Nebulizer Bottle

Oxygen percentage adjustable spray bottle

Oxygen spray cylinder, adjustable to 3 levels, 40%, 70% and 100%
500 cc spray cylinder made of POLYSULPHON, durable, not broken when dropped. The cylinder can be sterilized by autoclaving.
The mist generator can be removed for cleaning in case of clogging.
There is a hole for a HEATER for heating.
There is a hole for a check valve to release pressure if the pressure exceeds 2 PSI or 40 mm/Hg.

X’ TEN Surgical Light

Illumination 130,000 lux
Color Temperature 3,500 K
Color Rendering Index 95 Ra
The system is a light-gathering system with glass and micro-lenses
Halogen bulbs / LED bulbs (Ambient Light)
Light PATTERN 26 -30 CM.

Jet Scavenging Outlet Assembly

JET SCAVENGING type using AIR COMPRESSOR as a driving force to create a vacuum to drain excess gas from the anesthesia machine.
VACUUM STRENGTH can be adjusted from 5 – 15 centimeters/water (VACUUM CAPACITY UP TO 70 LPM.)
There is a GREEN PNEUMATIC INDICATOR signal system to show the operating status of the anesthesia machine.
SCAVENGING FLEXIBLE HOSE set, size 19 – 22 mm., length 4 meters with internal coil to prevent compression.
Equipment and safety standards DIN STANDARD, NFPA 99, CE mark, ISO 14385, ISO 9001
Injector-Vanturi gas purging system
Suction force can be adjusted by special tools
Increased safety for personnel in the operating room
DIN standard

Master Alarm System

Alarm system / MASTER ALARM
Alerts of abnormal gas system conditions with light and sound
Operating system with ELECTRONIC CIRCUIT BOARD
Alarm system / MASTER ALARM is a product certified for production standards according to ISO 9001 and ISO 13485, CE MARK. It has general properties that meet NFPA 99 standards.

Zone Valve Box Gas Shut-Off Valve System

The valve body can withstand pressure up to 500 PSIG.
Valve body is a full bore port, 3-piece valve.
Standard pressure gauge for inspection and service.
It has properties according to NFPA 99.

The door for the main operating room entrance (Main Door) is designed for use in the operating room as a sliding door, brand MARKUS, model M5 or MARKRONOMIC, which is a product of Europe or America. It has an opening size of 1,500 mm. x 2,100 mm. with a 300 mm. x 300 mm. glass window, it is a hermetic sealing system, HERMETIC SEALING SLIDING DOOR. The top and sides of the door edge are installed with RUBBER SEALING PROFILE rubber sheets and the bottom edge of the door is installed with STRIP RIGID RUBBER SEAL rubber edges along the line with door hanging rails. The sliding door runs on BALL RACES with NYLON wheels. The door handle is made of aluminum. The door opens and closes automatically controlled by a MICRO PROCESSOR MICRO PROCESSOR with elbow control switches (ELBOW SWITCH) and NO TOUCH SWITCH. There is a SINGLE – BEAM PHOTO – ELECTRIC CELL safety system. If there is an obstacle at the door, the door will stop and open automatically in case of malfunction of the automatic open-close set or power outage. The door can be opened-closed with the door handle. The door is about 40 mm thick and can prevent noise of about 27 decibels. The door frame is made of SATIN ANODIZED EXTRUDED ALUMINIUM SATIN ANODIZED EXTRUDED ALUMINIUM. The door surface is covered with PLASTIC PLASTIC LAMINATE. The door frame and door are finished products from the same manufacturer. The main entrance door to the operating room has been tested according to the air leakage prevention standard AIR PERMEABILITY TEST SLIDING DOOR ANSI / UL 1784 or BS 476.

Note: The product is a MARKUS or KONE brand from the Netherlands.