Products > Operating Theatre, Surgical Light
Axcel Surgical Light

Axcel Surgical Light

axcel-001
  • Illumination 100,000 lux
  • Color Temperature  3,500 K
  • Color Rendering Index  95  Ra
  • The system is a combined light system with glass and lenses
  • Halogen bulbs / LED bulbs  (Ambient  Light)
  • Can change bulbs quickly and conveniently without using tools

PDF Download

Featured Products

See All
AIR-PLENUM-Marchhart-001

AIR PLENUM WITH LOW TURBULANCE DISPLACEMENT FLOW

LAMINAR FLOW SUPPLY Clean Air Supply Panel Set for Operating Rooms The clean air supply panel set is designed for use in operating rooms that require high cleanliness and has an air supply characteristic as an air curtain. The wind speed is approximately 0.25 M/S (LAMINAR FLOW). It is installed above the operating table to prevent infection (PROTECTION CLEAN ZONE) according to the standards EN ISO 14644-1, ONORM H 6020, DIN1946 and VDC 2083.

The clean air supply panel consists of

  • The structure (HOUSING STRUCTURE) is made of aluminum both inside and outside through the anti-corrosion treatment with RAL 9010 baking paint.
  • High-efficiency air filter (HEPA FILTER)
  • Lighting system (BACKGROUND ILLUMINATION)
  • LAMINAR air distribution panel (LAMINARISATOR)

Technical features

  • CASING DIMENSIONS 2,506 MM x 2,506 MM x 420 MM
  • PROTECTION ZONE 4.4 m2
  • NUMBER OF FILTERS 4 PCS
  • INITIAL FILTER PRESSURE 175 Pa
  • NOMINAL VOLUME FLOW 5,180 m3/h
  • AIRFLOW VELOCITY OF 0.25 M/s
quick-connect-001

Oxygen Therapy Unit (Nebulizer) Wall-mounted oxygen and humidifier unit with adjustable percentage spraying

  • FLOW METER can adjust oxygen flow rate 0-15 liters / minute
  • The body is made of anodized aluminum, light weight
  • There is a dust filter inside the flowmeter
  • Nebulizer can be adjusted to 3 levels 40%, 70% and 100%
  • There is a slot for a HEATER for heating
  • There is a check valve slot to release pressure When the pressure is more than 2 PSI  or  40 mm / Hg
  • 500 cc humidifier cylinder made of polysulfon (POLYSULPHON), durable, not broken, the cylinder can be sterilized by autoclaving
zone-valve-box-001

Zone Valve Box

Valve box with a pull-out window and Valve box with an aluminium door

General Speciications

  • Zone valve box shall be Silbermann series.
  • Each recessed/exposed zone valve shall consist of a steel valve box constructed of 1.5 mm steel sheet, complete with a backed enamel inish RAL 9016, which can house single or multiple shut-off ball valves with the tube extensions.
  • Valves shall be a 3-piece forged brass and a 4 bolt design, bronze or brass body, stem, ball bolts and nuts shall be made of stainless steel , double seal, full port union balltype, with Telon (RPTFE) seats and Viton seals, with a pressure rating of 4080 kPa (600 psi) or 40.8 bars.
  • Valves shall be operated by a lever-type handle requiring anly a quarter turn from a fully opened to a fully closed position. All valves shall be equipped with type “K” washed and degreased copper pipe stub extensions of suficient length to protrude beyond the sides of the box.
  • All pipe stub extensions shall be supplied with suitable plugs or caps to prevent contamination of the assembly prior to installation.
  • Each valve shall be supplied with a medical gas identiication label.
  • Valves shall be available with or without line pressure gauges, as required. Gauges, shall be 50 mm diameter.
  • Pressure gauges shall read 0-1100 kPa (0-11 bar) for all gauges except Nitrogen, which shall read 0-2500 kPa (0-25 bar), and Vacuum, which shall read 0-100 kPa (0-760 mmHg).
  • There are two front options: an aluminum door or a pull-out removable window.
Bubble-Jet-Bottle-001

Bubble Jet Bottle

Humidifier and mist bottle

  • Humidifier and spray bottle (Bubble Jet) size 500 cc.
  • Made of polysulfone (POLYSULPHON), durable, not broken when dropped. The atomizer can be removed for cleaning in case of clogging.
  • The bottle can be sterilized by autoclaving.
  • There is a check valve slot to release pressure when the pressure exceeds 2 PSI or 40 mm/Hg.
Oxygen-Therapy-Unit-Nebulize-001

Oxygen Therapy Unit ( Nebulizer ) Rail Mounted

Oxygen and humidifier set with adjustable percentage hanging on equipment rail

  • Flowmeter can adjust oxygen flow rate 0 – 15 liters / minute
  • There is a dust filter set inside the flowmeter
  • The spray bottle can be adjusted to 3 levels: 40%, 70% and 100%
  • There is a slot for a HEATER for heating
  • There is a check valve slot to release pressure when the pressure exceeds 2 PSI or 40 mm / Hg
  • 500 cc humidifier cylinder made of POLYSULPHON, durable, not broken when dropped, made sterile by autoclaving
  • There is a holder on the equipment hanging rail, can be moved to the desired position, suitable for use in emergency rooms and critical patient rooms
Vacuum-Breaker-Unit-Wall-Mounted-001

Vacuum Breaker Unit Wall Mounted

Wall-mounted chest suction unit

  • Adjustable suction rate from 0 – 30 cm/H2O
  • There is a water bottle to measure the suction rate from 0 – 30 cm/H2O
  • The bottle holds liquids and sputum of 1,800 cc. The bottle is clear and can be seen all around. There are lines indicating the amount of liquid. It can be sterilized by steam. Convenient for cleaning, with a hanging basket.

Contact Us

J.E.P. enterprise,co.ltd

  • 235/8 21 สุขุมวิท 21 (อโศก) แขวงคลองเตยเหนือ เขตวัฒนา กรุงเทพมหานคร 10110
  • 02 258 0447
  • info@jep.co.th

Useful Links

Follow Us

Facebook Line

© Copyright J.E.P. enterprise,co.ltd 2024.