Products > Medical Gas, Oxygen & Suction Unit
Y’ Adaptor Assembly

Y’ Adaptor Assembly

Adaptor-Assembly-001

2-way WALL OUTLET connection kit, can be connected to oxygen flowmeter or ventilator in 2 ways.

PDF Download

Featured Products

See All
quick-connect-002

Oxygen Therapy Unit with Humidifier Wall Mounted

  • FLOW METER can adjust the oxygen flow rate from 0-15 liters/minute
  • The housing is made of anodized aluminum, light weight
  • There is a dust filter inside the flowmeter
  • The humidifier cylinder size 500 cc. is made of polysulfone (POLYSULPHON), durable, not broken when dropped. The cylinder can be sterilized by steam sterilization (AUTOCLAVEABLE)
  • There is a check valve slot to release pressure when the pressure exceeds 2 PSI  or  40 mm/Hg
Vacuum-Breaker-Unit-Wall-Mounted-001

Vacuum Breaker Unit Wall Mounted

Wall-mounted chest suction unit

  • Adjustable suction rate from 0 – 30 cm/H2O
  • There is a water bottle to measure the suction rate from 0 – 30 cm/H2O
  • The bottle holds liquids and sputum of 1,800 cc. The bottle is clear and can be seen all around. There are lines indicating the amount of liquid. It can be sterilized by steam. Convenient for cleaning, with a hanging basket.
axcel-001

Axcel Surgical Light

  • Illumination 100,000 lux
  • Color Temperature  3,500 K
  • Color Rendering Index  95  Ra
  • The system is a combined light system with glass and lenses
  • Halogen bulbs / LED bulbs  (Ambient  Light)
  • Can change bulbs quickly and conveniently without using tools
Ball-Valve-Model-SP150-001

Ball Valve with Extensions Model SP150

Cleaned for medical gas use and 100% hydrostatic tested, these 3 piece medical gas valves are designed to meet the NFPA 99c, ISO 7396-1 & G-01 standards.

Specifications

  • Valve shall be 3 piece ball-type full bore design, with a bronze/ brass body, stainless steel ball, stem, bolts & nuts.
  • Seat shall be Teflon (RPTFE) and seals Viton.
  • Valves ½” to 2” shall have a minimum pressure rating of 4137 kpa (600 psi) wog.Valves 3” to 4” shall have a minimum pressure rating of 2758 kpa (400 psi) wog.
  • Valve shall require only a quarter turn from fully open position to a fully closed position.
  • Extensions stubs shall be K type with a minimum 150 mm long to allow brazing without damaging the valve seat and seals due to heat transfer during brazing operati
  • Each valve shall be hydrostatically tested for leakages.
  • Each valve shall be washed and degreased for medical gas use.
  • Pipe stubs extensions shall be capped at both ends.
  • The valves shall be supplied in sealed plastic bags, marked with “Oxygen” or “cleaned for oxygen use”, to prevent contamination prior to installation.
  • Valves shall be Silbermann model SP150 or equivalent.
  • All valves shall comply with NFPA 99, ISO 7396-1 & G-01 standards.

Medical Gas System Standards:

  • NFPA99, EN ISO 7396-1 & G-01 requirements.

Silbermann’s Quality Management System:

  • EN ISO 13485-2016
    ISO 9001-2015. Medical Gas System Standards:
Plastic-Tubing-Flexible-001

Plastic Tubing Flexible Transparant Non-Toxic For Medical Gas

Pressure resistant rubber tubing for medical gas systems

  • Plastic Flexible Tubing, pressure resistant hose for medical gas systems, anti-static hose type
Medical-Gas-Control-Panel-001

Medical Gas Control Panel

The SILBERMANN medical gas control panel supplies adjustable pressure, as required, to pneumatic-driven surgical tools in the operating theaters.

Silbermann’s gas control panel is designed to meet the latest and most rigid American NFPA99 and European EN ISO 7396-1 requirements

Features

  • Compatible with Nitrogen or Industrial Air
  • Easy, safe and reliable connection between the medical equipment and the medical gas distribution system
  • Anodized Aluminum front with rounded edges for aesthetic appeal
  • Manual shut-off valve
  • Inlet & outlet pressure gauges
  • DISS or NIST outlet connection
  • A Knob to adjust outlet pressure

Medical Gas System Standards:

  • NFPA99, EN ISO 7396-1

Silbermann’s Quality Management System:

  • ISO 9001-2015
  • ISO 13485-2016
  • CE mark

Contact Us

J.E.P. enterprise,co.ltd

  • 235/8 21 สุขุมวิท 21 (อโศก) แขวงคลองเตยเหนือ เขตวัฒนา กรุงเทพมหานคร 10110
  • 02 258 0447
  • info@jep.co.th

Useful Links

Follow Us

Facebook Line

© Copyright J.E.P. enterprise,co.ltd 2024.